100PFT-P

Picket Fence Tool-Point unit will flatten and trim one end of your tube to an arrow head with a sharp point in a single press stroke. Accepts tubing up to 1” square x .065” wall (16 ga.) aluminum or mild steel. Interchangeable form pads are available to reduce the length of flat if required.

100PFT-R

Picket Fence Tool-Radius unit will flatten and trim one end of your tube to an arrow head with a radius point in a single press stroke.  Accepts tubing up to 1” square x .065” wall (16 ga.) aluminum and mild steel. Interchangeable form pads are available to reduce the length of flat if required.

100PFTS

Picket Fence Tool Special die will flatten and trim one end of your tube to an arrow head with a radius point and roll the cut edge over sealing it in a single press stroke.  Accepts tubing up to 1” square x .065” wall (16 ga.) aluminum. Interchangeable form pads are available to reduce the length of flat if required.